Solar Gard® Armorcoat is a series of clear interior safety and security window films engineered to hold shattered glass in place upon impact. Unlike standard glazing, which breaks into dangerous fragments when struck, Armorcoat-treated glass keeps broken panes bonded together — significantly reducing the risk of glass-related injury and slowing unauthorized entry through glass openings.
The Window Place USA is an authorized Saint-Gobain Solar Gard distributor. We supply Armorcoat 4 Mil, 7 Mil, and 8 Mil clear safety film in factory-sealed 100-foot master rolls, shipped nationwide. Government agencies, school districts, commercial facilities, and homeowners order directly from us.
Armorcoat film is a thick, optically clear polyester film applied to the interior surface of existing glass using a pressure-sensitive adhesive. The adhesive bonds the film to the glass face. When the glass pane breaks — whether from accidental impact, a thrown object, or attempted forced entry — the film holds the broken pieces together in the frame rather than allowing them to scatter as sharp fragments.
The result is a glass pane that has failed structurally but remains largely intact within its frame, functioning as a temporary barrier. This characteristic is valuable in three ways:
All Armorcoat products block more than 99% of UV-A and UV-B radiation — the same UV spectrum responsible for fabric fading, flooring degradation, and prolonged sun exposure effects — while remaining virtually invisible on the glass.
Armorcoat is available in multiple thicknesses. The correct specification depends on the level of protection required, the application type, and the glass configuration. The three thicknesses available for direct purchase through The Window Place USA are 4 Mil, 7 Mil, and 8 Mil.
| Thickness | Primary Use | Typical Applications | UV Rejection | Available From TWP |
|---|---|---|---|---|
| 4 Mil | Baseline safety glazing | Residential windows, sliding glass doors, shower enclosures, interior partitions, schools, retail | >99% | ✓ Direct Sale |
| 7 Mil | Enhanced fragment retention | Commercial storefronts, government buildings, schools, hospitals, public facilities, high-risk residential | >99% | ✓ Direct Sale |
| 8 Mil | Maximum single-ply protection | High-security commercial, banks, data centers, pharmacies, government buildings, schools, severe-weather regions | >99% | ✓ Direct Sale |
For a detailed breakdown of the performance differences between the three direct-sale thicknesses, see our article: 4 Mil vs. 7 Mil vs. 8 Mil Safety & Security Window Film.
Armorcoat 4 Mil is the most common residential safety film choice. It adds a meaningful layer of glass retention to sliding glass doors, large windows, and any glass surface that presents a fall-through or storm-damage risk — without any visible change to the glass. The 8 Mil provides a heavier-duty option for homeowners in areas where greater protection is a priority.
Retail storefronts with large glass facades are vulnerable to smash-and-grab attempts and accidental vehicle impact. Armorcoat 7 Mil and 8 Mil applied to street-level glass delays breach and keeps glass in place, reducing the window of opportunity in fast-moving incidents. Banks, pharmacies, jewelry stores, and convenience stores commonly specify safety film on customer-facing glass.
Safety film is increasingly part of school glazing specifications. Armorcoat 4 Mil and 8 Mil are both used in K-12 applications for glass retention during lockdown scenarios, storm events, and accidental breakage. The Window Place USA is a SAM-registered vendor (CAGE: 52MH9) and can supply film directly to school districts under purchase orders, P-Cards, and government procurement vehicles. For complete guidance on school security film specifications and procurement, see our School Safety Window Film guide.
Government buildings — including courthouses, municipal facilities, federal offices, and embassies — frequently include security film in their glazing specifications. The Window Place USA supplies Armorcoat 4, 7, and 8 Mil material directly to government procurement officers, facilities departments, and authorized contractors as a SAM-registered, CAGE-coded vendor. Contact us for formal quotes, specification sheets, and procurement documentation.
The Window Place USA sells Armorcoat 4 Mil, 7 Mil, and 8 Mil clear safety film directly in factory-sealed 100-foot master rolls. We are an authorized Saint-Gobain Solar Gard distributor. No dealer markup. Ships nationwide via FedEx.
Not sure which thickness is right for your project? Contact The Window Place USA — we help you identify the correct specification based on your glass type, application, and project requirements.
Solar Gard Armorcoat 4, 7, and 8 Mil Clear safety film carries a Limited Lifetime residential warranty and a 12-year commercial warranty under Solar Gard's standard performance warranty terms.
Warranty eligibility requires two conditions, both of which must be met:
DIY purchasers who install the film themselves receive genuine Solar Gard product with full published performance specifications, but DIY installation does not satisfy condition 2 — and therefore does not qualify for the Solar Gard manufacturer warranty. For full warranty eligibility details, see our Window Film Lifespan and Warranty guide.
The Window Place USA is a SAM-registered federal contractor and authorized Solar Gard distributor:
We supply factory-sealed master rolls directly to government agencies, school districts, university facilities departments, and authorized contractors. For specification documentation, formal quotes, or procurement support, contact us.
Solar Gard Armorcoat is a series of clear interior safety and security window films manufactured by Saint-Gobain. When applied to glass, Armorcoat holds broken glass fragments together in the frame upon impact, reducing the risk of injury from flying glass and slowing unauthorized entry through glass openings. It is used in residential, commercial, school, and government glazing applications.
The mil number refers to the film's thickness. A thicker film holds glass fragments more firmly and requires more force to breach once the glass has broken. 4 Mil is the standard choice for baseline residential safety glazing. 7 Mil provides enhanced fragment retention for commercial and higher-risk applications. 8 Mil is the heaviest single-ply option in the direct-sale lineup, suited to high-security commercial and institutional glazing. All three block more than 99% of UV radiation. For a detailed breakdown, see our 4 Mil vs. 7 Mil vs. 8 Mil comparison article.
Yes. Armorcoat 4 Mil, 7 Mil, and 8 Mil clear safety film is available for direct purchase from The Window Place USA in factory-sealed 100-foot master rolls. We are an authorized Saint-Gobain Solar Gard distributor.
Armorcoat is an interior-applied film — it is installed on the room-facing (interior) surface of the glass. If you need an exterior-applied security film for a building where interior access is restricted or impractical, Solar Gard Sentinel Plus OSW (Outside Surface Weatherable) is the appropriate exterior-application product.
Clear Armorcoat safety film is not designed for significant solar heat rejection — it is optically clear and focused on glass retention and UV protection. It blocks more than 99% of UV radiation. If your project requires both safety glazing and heat reduction, contact The Window Place USA to discuss whether a tinted or solar-control safety film option is appropriate for your glass type and application.
Safety film can be applied to the interior lite of a dual-pane (IGU) window. However, film application on insulating glass units requires verification of thermal stress compatibility before installation. Contact The Window Place USA for a free compatibility assessment — we can review your glass type and help determine whether a specific Armorcoat product is appropriate for your IGU configuration.
Solar Gard Armorcoat 4, 7, and 8 Mil Clear carries a Limited Lifetime residential warranty and a 12-year commercial warranty. Warranty eligibility requires both purchase from an authorized Solar Gard distributor (satisfied when purchased from The Window Place USA) and installation by an authorized Solar Gard dealer. DIY installation does not qualify for the Solar Gard manufacturer warranty.
Yes. The Window Place USA is a SAM-registered vendor (CAGE: 52MH9) and accepts government purchase orders, P-Cards, and institutional procurement methods. We supply factory-sealed Armorcoat master rolls directly to government agencies, school districts, and authorized contractors. NAICS codes: 238150, 423390. Contact us for formal quotes, specification documentation, and procurement support.
The Window Place USA helps you identify the correct thickness and roll configuration for your glass type, application, and project specifications — at no charge.
Contact Us for Product Selection →