Solar Gard 6 Mil GraffitiGard 2-Ply Window Film — Dual-Layer Anti-Graffiti Protection
Solar Gard 6 Mil GraffitiGard 2-Ply is a dual-layer sacrificial film that provides enhanced protection against scratching, etching and graffiti. The 2-ply construction means the outer layer can be removed independently, leaving the inner layer still protecting the glass — extending the service life between full replacements.
Key Benefits
- 2-ply design — the outer sacrificial layer peels off when vandalized; the inner layer remains in place and continues to protect the glass until it, too, needs replacement.
- Extended protection cycle — two layers mean fewer full-film replacements, reducing long-term maintenance costs.
- 6 mil total thickness — thicker than the 4 mil single-ply, offering greater resistance to deep scratches and gouges.
- Optically clear — both layers are transparent, maintaining the original look of the protected surface.
- Quick outer-layer swap — stripping and replacing just the outer ply is fast and simple.
Ideal Applications
- High-traffic transit systems — bus shelters, train windows and station glass
- Elevators and lobbies in commercial buildings with frequent vandalism
- Public restrooms, parking garages and stairwells
- Retail storefronts in urban areas prone to tagging
Buyer Guidance
The 2-Ply 6 Mil is ideal for environments with recurring vandalism, because the outer layer can be replaced without disturbing the inner layer. If vandalism is infrequent, the single-ply 4 Mil may be more economical. For the heaviest-duty single-ply protection, see the 7 Mil GraffitiGard. Supplied as uncut rolls by The Window Place USA; professional installation is recommended.
Available Sizes
Available in 36″, 48″ and 60″ widths, each in 50-foot and 100-foot roll lengths.
Performance Specifications — GraffitiGard 6 Mil
| Specification | GraffitiGard 6 Mil |
|---|---|
| Visible Light Transmittance (VLT) | ~99% (optically clear) |
| UV Reduction | >99% |
| Film Thickness | 6 mil (150 micron) |
| Construction | Dual-layer (2-ply) polyester |
| Fire Rating | Class B-s1, d0 (EN 13501-1) / Class M1 |
| VOC Emissions | Class A+ (NF-ISO 16000) |
| EN 45545 Compliance | R1-HL1/HL2/HL3 |
Physical property data sourced from Solar Gard GraffitiGard product documentation. Actual in-field results can vary by substrate and installation conditions.
Frequently Asked Questions
1. What is the advantage of 2-ply over single-ply?
When the outer layer is vandalized, you peel off only that layer. The inner layer stays on the glass, so you get two protection cycles before a full replacement is needed.
2. Can I remove just the outer layer without damaging the inner layer?
Yes. The 2-ply system is engineered so the outer ply separates cleanly from the inner ply.
3. Is 6 Mil 2-Ply thicker than 7 Mil single-ply?
No. The total thickness of the 2-ply product is 6 mil. The 7 Mil single-ply is thicker overall but does not offer the dual-layer replacement advantage.
4. Does The Window Place USA install the film?
No. We supply Solar Gard film nationwide. Contact a professional film installer in your area for application.
5. How long does each layer last?
Lifespan depends on the level of vandalism. In moderate-vandalism settings, each layer can last months to years before replacement is needed.
