Solar Gard TrueVue 5 Window Film — Maximum Privacy & Solar Rejection
Solar Gard TrueVue 5 is a dual-reflective window film with 5% visible-light transmission (VLT), delivering the darkest tint in the TrueVue lineup. It is designed for glass surfaces where near-total privacy, glare reduction and solar-heat rejection are top priorities.
Key Benefits
- Near-total daytime privacy — the 5% VLT blocks almost all visible light, making interior spaces virtually invisible from the outside during daylight hours.
- High solar-heat rejection — the dual-reflective construction reflects a significant portion of solar energy away from the glass.
- Glare control — dramatically reduces screen glare in offices, conference rooms and media areas.
- UV filtering — blocks up to 99% of harmful ultraviolet rays, helping protect furnishings and flooring from fading.
- Dual-reflective finish — the exterior side is highly reflective for maximum performance while the interior side has a lower reflectivity for a more comfortable appearance from inside.
Ideal Applications
- Ground-floor commercial storefronts requiring one-way daytime privacy
- Server rooms, data centers and equipment areas where heat and light must be minimized
- Residential windows facing direct sun exposure or neighboring properties
- Conference rooms, home theaters and media rooms
Buyer Guidance
TrueVue 5 is the darkest film in the Solar Gard TrueVue series. Because it allows only 5% of visible light through the glass, interior spaces will appear significantly darker. Verify that local building codes and HOA regulations permit reflective or dark-tint films before ordering. This film is supplied by The Window Place USA as uncut rolls — professional installation by a qualified film applicator is recommended for best results.
Available Sizes
TrueVue 5 is stocked in 36″, 48″ and 60″ widths. Each width is available in 50-foot and 100-foot roll lengths, allowing you to match the roll size to your project scope.
Performance Specifications — TrueVue 5
| Specification | TrueVue 5 |
|---|---|
| Visible Light Transmittance (VLT) | 5% |
| Visible Light Reflectance (Exterior) | 44% |
| Visible Light Reflectance (Interior) | 8% |
| Solar Heat Gain Coefficient (SHGC) | 0.21 |
| Total Solar Energy Rejected (TSER) | 79% |
| UV Light Blocked (300–380nm) | >99% |
| Fade Reduction | 95% |
Performance data sourced from Solar Gard TrueVue product documentation. Tested on 1/4" (6mm) clear glass per NFRC methodology. Actual in-field results can vary by glass type, orientation and installation conditions.
Frequently Asked Questions
1. How dark is TrueVue 5?
At 5% VLT, this film allows very little visible light through the glass. Interiors will appear dark from the outside during the day, providing near-complete visual privacy.
2. Does TrueVue 5 provide nighttime privacy?
No. Like all reflective and tinted films, privacy depends on the light differential between inside and outside. When interior lights are on at night, the effect reverses and the interior becomes more visible.
3. Can I use TrueVue 5 on dual-pane (insulated) glass?
Dark films on insulated glass can increase thermal stress. Consult your glass manufacturer's warranty guidelines and a qualified installer before applying to dual-pane units.
4. Does The Window Place USA install the film?
No. The Window Place USA is a nationwide supplier of Solar Gard window film. We ship uncut rolls directly to you or your installer.
5. Which width should I order?
Measure the width of the glass to be covered. Choose the roll width that is equal to or slightly wider than the glass — the film is trimmed to fit during installation.
