Solar Gard PureVue 35 Window Film — Ceramic Solar Control Without Signal Interference
Solar Gard PureVue 35 is a non-metallic ceramic window film that transmits 35% of visible light. It offers strong heat rejection and glare control without the metallic layers that can disrupt cell signals, GPS, Wi-Fi and radio reception.
Key Benefits
- Ceramic construction — metal-free design eliminates interference with wireless signals, Bluetooth and electronic toll transponders.
- High heat rejection — advanced ceramic particles block a significant share of infrared energy, reducing heat gain through the glass.
- Moderate VLT — at 35%, the film provides a noticeable tint that reduces glare while keeping rooms reasonably bright.
- UV filtering — blocks up to 99% of UV radiation to help protect interior finishes.
- Low interior and exterior reflectance — produces a neutral, non-mirror-like appearance on both sides of the glass.
Ideal Applications
- Commercial offices and healthcare facilities where wireless connectivity is critical
- Residential homes near cell towers or in areas with marginal signal strength
- Vehicles and marine vessels (where local regulations allow)
- High-rise buildings where metallic films may interfere with building-management radio systems
Buyer Guidance
Choose PureVue 35 when you need the heat rejection of a solar film but cannot tolerate signal interference. The 35% VLT makes it the darkest option in the PureVue ceramic range, so it pairs well with spaces that also need moderate privacy. Supplied as uncut rolls by The Window Place USA; professional installation is recommended.
Available Sizes
Stocked in 36″, 48″ and 60″ widths, each available in 50-foot and 100-foot roll lengths.
Performance Specifications — PureVue 35
| Specification | PureVue 35 |
|---|---|
| Visible Light Transmittance (VLT) | 37% |
| Visible Light Reflectance (Exterior) | 16% |
| Visible Light Reflectance (Interior) | 15% |
| Solar Heat Gain Coefficient (SHGC) | 0.42 |
| Total Solar Energy Rejected (TSER) | 58% |
| UV Light Blocked (300–380nm) | >99% |
Performance data sourced from Solar Gard PureVue product documentation. Tested on 1/4" (6mm) clear glass per NFRC methodology. Actual in-field results can vary by glass type, orientation and installation conditions.
Frequently Asked Questions
1. What makes PureVue different from TrueVue?
PureVue uses ceramic (non-metallic) technology, so it will not interfere with wireless signals. TrueVue uses a dual-reflective metallic construction that may affect cell and radio reception.
2. Does PureVue 35 look reflective?
No. Ceramic films have low reflectance on both sides, giving the glass a neutral, tinted appearance rather than a mirror-like finish.
3. Is this film suitable for insulated (dual-pane) glass?
Ceramic films generally impose less thermal stress than metallic films. However, always verify compatibility with your window manufacturer before application.
4. Does The Window Place USA install window film?
No. We supply Solar Gard film nationwide. Installation should be performed by a qualified professional in your area.
5. Can I mix PureVue 35 with other VLTs on the same building?
Yes. Many projects use a darker VLT on sun-facing elevations and a lighter VLT on shaded sides. All PureVue films share a similar neutral color tone for a consistent exterior appearance.
